Can Optical Vision Inspection Equipment Simultaneously Detect Multiple Products at the Same Time?
Can Optical Inspection Screening Equipment Simultaneously Detect Multiple Products at the Same Time?
As a professional optical vision machine manufacturer, we give you the negative answer. Generally, one machine can’t simultaneously detect multiple products.
The program, software and configuration of a inspection machine have been set up. For example, to detect the sealing ring, the customer requires to detect the appearance, size and diameter. Products of similar models can be detected. However, if the customer needs to detect a large sealing ring, the machine can not meet this requirement.
In fact, many processing plants have already completed the transformation and development to automation technology, and have applied new machine vision technology to carry out IQC for the product appearance detection. It can replace the traditional human quality inspection and complete the efficient automatic technology inspection on the product appearance line. According to the independent detection and automatic retrieval of the product defect of the machine, the inspection rate can be synchronized with the automatic production line. The appearance of the products produced and manufactured by one company is one of the most important elements of product quality. Whether there are defects or not is not only related to the sensory enjoyment of the customers, some even affect the application and post production and processing themselves.
Introduction to visual defect inspection equipment:
When the light shines on the product surface with various defects, various defects will show different abnormalities from the surrounding at the reflection surface, mapping and other levels. For example, when the symmetrical light irradiates the product surface vertically, if the product surface has no defects, the irradiated part is not easy to change, and the detected light is also symmetrical; When the product surface has defects, the irradiated light will change, and the detected image will change with it.
Because of the existence of defects, stress and deformation occur around them, which is also very easy to observe in the image. If light scattering defects (such as cracks, bubbles, etc.) are encountered, the light will be mapped at the defect, and the light intensity is greater than that of the surrounding, so the light detected on the target surface of the camera is also relatively improved; If light absorbing (such as sand) residues are encountered, the light at the defect will be weakened, and the light detected on the target surface of the camera is weaker than the surrounding light. By analyzing the image data signal and the image characteristics collected by the camera , the relative defect information content can be obtained.
Characteristics of visual inspection equipment:
1. Complete partial full inspection with highest efficiency; 2. Digital camera and solution technology can quickly detect, classify, display information, remove defects, etc; 3. High quality electronic optical configuration is used for urgent defect inspection, even low saturation defects; 4. Intelligent mobile phone software: defects are accurately classified into each file directory according to the source; 5. The actual operation is simple and convenient, and the defect monitoring system can be used without strengthening learning; 6. The information content is accurate, immediate and reliable.
Visual defect inspection equipment can not only detect the appearance size of products, but also detect the assembly line , label, bar code detection, etc.
RKE Intelligent Technology Co., Ltd. focuses on the R & D and production of visual inspection equipment. Welcome to consult if you have requirements.